×
Kāinga > Nga Kaihokohoko > Pā Rūpahu > Ngā Wāhi Kumi a te Motokā
|
1.Kaihanga Rawa: |
DuPont (US) / Dow Corning (Germany) / Bayer (Germany) / 3M |
|
2.Momo: |
Nga Taumata o te Motokā |
|
3.Momo Pūngao: |
NBR\/FKM\/Silicone\/EPDM\/HNBR... |
|
5. Rahi: |
Tauranga me te Tūtohu |
|
5.Tikanga Whakamahi o ngā Pūnaha |
Rautaki hanganga, āwhai rawa, hanganga, hanga, kōpūnuku, petroleumi |
|
6.Karara: |
Mangu, ma, whero, ranei ko tētahi kawe tūtohu |
|
7.Paraetai: |
Uhu mai i -60° C ki +220° C i waenganui i ngā hua rerekē |
|
8.Tohu Whare |
IATF 16949:2016 me te Tohu ISO9001, ISO14001 |
|
9.Tuatahi Whakapāhongahia |
KTW-W270/ Rauemi Waiwhiua/ LFGB/ RoHs/REACH/FDA |
He momo hangarau nui rawa te pūtake whakarākai pūtango i whakamahia i ngā whatu hiko korenga, ēngari e kore e kitea ana i aua whatu e whai ana i ngā toko rangitahi (OHC) rānei ko ngā toko (OHV). I whakaawe nei kia tino tūtonu me te kore pūtauheke te whakawehenga i waenganui i te kape pūtango me te kapa porowhita o te whatu hiko. Ko te kape pūtango he kape whakauru e noho ana runga i te kapa porowhita, e whakarapu ana i ngā pūtango me ētahi atu hangarau o te whatu hiko.
1. Whakamutunga o te Waihuka: Ko te tino tūmanako o te kākati pūtango he whakamutunga i ngā wāhanga waihuka mai i te taha runga o te mīhini. Ka hangaia e ia tētahi kawe pai i waenganui i te pūtango me te kiriwhara roroa, kia noho ai te waihuka ki roto i te mīhini, kāore i wāhanga atu ki ngā hanga ā-mīhini nōreira rānei ki te whenua.
2. Whakahoki i te Mīhini: Ki te whakamutunga i ngā wāhanga waihuka, ka awhina ngā kākati pūtango i te mīhini ki te whakahoki i ngā take e pā ana ki te waihuka, pērā i te iti haere o te waihuka, te whakaputuaka o te waihuka, me te whanangatanga o te mīhini nā te iti nei i te tahuti waihuka.
3. Nui ake i te Hanga Kaha o te Mīhini: Ki te mahi pai ngā kākati pūtango, ka tukua e rātau te nui ake i te hanga kaha o te mīhini, ka taea te whakamana i te waihuka kia kitea, kia tiakina ki roto i te mīhini. Ko tēnei e hiahiatia nei te whakatika o te mīhini me te tahuti pai rawa o ngā hanga kauwhata.
4. Te Iti i te Whakamahia o te Kāpihi: Nō te pēki kapa whakaroto, ka taea te iti i te whakamahia o te kāpihi mō te whakatūpū i ngā pūtake kāpihi me te tirotiro ki te whakamātau i te wai kāpihi i roto i te motokā. Ka taea e tēnei te whakatīngae ake i waenga i ngā taumata kawe kāpihi me te whakaiti i ngā utu kāpihi.
5. Te Whakakapi i ngā Hua Whatu: Nō te pēki kapa whakaroto, ka taea te whakapiripiri i ngā hua whatu, pērā i te huka, te oneone, me ngā hua rahi, i waho i te wāhanga pūtango o te motokā. Ko tēnei ka taea te mahi pai o ngā pūtango me ēnei atu hanga, ka noho pai, me te whakaiti i te mate mura.
6. Te Mōhio ki te Hua me te Rākau: He mea hanga nui ngā pēki kapa whakaroto kēhei hei whakatika i ngā hua me te rākau kei roto i te wāhanga motokā. Ka noho pūmau tonu te pai me te whanake, ahakoa ngā take whakahaere nui.
7. Whakakapi Tino Waimarie: Nō te pēki kapa whakaroto, ka waimarie rawa te whakakapi i waenga i ngā wā e hia nei, ka whakaae mai ki te mahi whakawhitiwhiti me te whakaiti i te wā kore.
8. Whakaiti Kōwhiri: He āhuatanga kei raihiti kē o ētahi pūtake whakarākai pūtango hei whakamāmā i ngā kōwhiri me te whakaiti heke i ngā waha i roto i te wāhi pūtango, tāpiri ana ki te mahi motokā e iti rawa atu ana i te waha.
9. Rawa Atu: Ka puta tonu ngā pūtake whakarākai pūtango i tere nei i te whakatakoto me te tirotiro whakamua, ka hirangatia te mīharo o te mahi, ka tuku tonu i te hoko whakarākai mō ērā wā e hirangatia ana.
| pūkenga | Te rautaki here kīwaha | Ingoa o te rautaki here | Pūkohu me ngā whiriwhiringa/taringa whakamatau | Ngā āhuatanga | Tohu āhuatanga kē | Tīpako | ||||
| Hua | Hua | |||||||||
| 1 | □ ↓ |
Matera o te karehu | matangaro | / | / | / | ||||
| 2 | ◇ ↓ |
IQC | Takirua whakamātau | Te Pūmau | / | ★ | ||||
| Pūtēnisi hīkoi | Te kaha toia | / | / | |||||||
| Pūtēnisi hīkoi | Te Whakapūmau | / | / | |||||||
| uikaumomo | Te āhuatanga o | / | / | |||||||
| Whare whakamātau whakarērea | Te hokitanga tata ki te mōhiti | / | / | |||||||
| 3 | □ ↓ |
Huihui | Whakaranu | / | Mēpā whakapuaki mm | / | ||||
| 4 | ◇ ↓ |
IQC | rheometer | TS2 | / | / | ||||
| TS50 | / | / | ||||||||
| TS90 | / | / | ||||||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| 5 | □ ↓ |
Waha kiri /blanking |
Pūhanga kiri | / | Ko tōna roa | / | ||||
| Mīhini mēpā | / | |||||||||
| 6 | □ ↓ |
whakairo | 300 t whakawāhi whatu, tāwaretanga aukati | / | Te pūngao whatu (kgcm2) | ★ | ||||
| / | Wā whatu | ★ | ||||||||
| / | Uwitu o te whatu | ★ | ||||||||
| matangaro | ahua | / | / | |||||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| Te kaiwhakaatu projekti/kaipahi | Rahi | / | ★ | |||||||
| 7 | □ ↓ |
IPQC | matangaro | ahua | / | / | ||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| Te kaiwhakaatu projekti/kaipahi | Rahi | / | ★ | |||||||
| 8 | □ ↓ |
whakakore āpā | matangaro | ahua | / | / | ||||
| Pūkaha whakakotahi aukati | / | Tere | / | |||||||
| / | Te wā | / | ||||||||
| 9 | □ ↓ |
Tatau Kaitiaki | Pārere/koki | ahua | / | / | ||||
| pūkenga | Te rautaki here kīwaha | Ingoa o te rautaki here | Pūkohu me ngā whiriwhiringa/taringa whakamatau | Ngā āhuatanga | Tohu āhuatanga kē | Tīpako | ||||
| Hua | Pānga | |||||||||
| 10 | ◇ ↓ |
FQC | matangaro | ahua | / | / | ||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| Te kaiwhakaatu projekti/kaipahi | Rahi | / | ★ | |||||||
| 11 | □ ↓ |
whakatika | Kete plastic | / | / | / | Whakatika ā-waha | |||
| / | / | / | ||||||||
| / | / | / | ||||||||
| 12 | □ ↓ |
Whakamātau i muri iho | Te umu | / | Te wā | ★ | ||||
| / | Te werohanga | ★ | ||||||||
| 13 | □ ↓ |
Whakapakoko | Electronic says | Tahi - | / | / | ||||
| Poro whakaputu | Te kaitohu | / | / | |||||||
| Te pūtauhi | Te lepe | / | / | |||||||
| matangaro | Ngā kāwai kai | / | / | |||||||
| 14 | ◇ ↓ |
OQC | matangaro | ahua | / | / | ||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| Te kaiwhakaatu projekti/kaipahi | Rahi | / | ★ | |||||||
| matangaro | tikanga | / | / | |||||||
| matangaro | whānautanga | / | / | |||||||
| 15 | □ | Whare putunga /delivery |
wīwī hoko | Raraunga tuku | / | / | ||||
| Kaiarahi | / | / | ||||||||
| Whakapā ki te whāiti | / | / | ||||||||
| Tīpako | 1．"◇" He whakamahara tono,"□" He whakamahara tātari,"↓" He whakamahara kawe,"△" He whakamahara taunga,"▲" He whakamahara whakaora anōhanga. | |||||||||
| 2．"★" He tohu āhuatanga matua mo te kai painga me te mahi. | ||||||||||
| pūkenga | Te rautaki here kīwaha | Ingoa o te rautaki here | Pūkohu me ngā whiriwhiringa/taringa whakamatau | Ngā āhuatanga | Tohu āhuatanga kē | Tīpako | ||||
| Hua | Pānga | |||||||||
| 10 | ◇ ↓ |
FQC | matangaro | ahua | / | / | ||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| Te kaiwhakaatu projekti/kaipahi | Rahi | / | ★ | |||||||
| 11 | □ ↓ |
whakatika | Kete plastic | / | / | / | Whakatika ā-waha | |||
| / | / | / | ||||||||
| / | / | / | ||||||||
| 12 | □ ↓ |
Whakamātau i muri iho | Te umu | / | Te wā | ★ | ||||
| / | Te werohanga | ★ | ||||||||
| 13 | □ ↓ |
Whakapakoko | Electronic says | Tahi - | / | / | ||||
| Poro whakaputu | Te kaitohu | / | / | |||||||
| Te pūtauhi | Te lepe | / | / | |||||||
| matangaro | Ngā kāwai kai | / | / | |||||||
| 14 | ◇ ↓ |
OQC | matangaro | ahua | / | / | ||||
| Takirua whakamātau | Te Pūmau | / | ★ | |||||||
| Te kaiwhakaatu projekti/kaipahi | Rahi | / | ★ | |||||||
| matangaro | tikanga | / | / | |||||||
| matangaro | whānautanga | / | / | |||||||
| 15 | □ | Whare putunga /delivery |
wīwī hoko | Raraunga tuku | / | / | ||||
| Kaiarahi | / | / | ||||||||
| Whakapā ki te whāiti | / | / | ||||||||
| Tīpako | 1．"◇" He whakamahara tono,"□" He whakamahara tātari,"↓" He whakamahara kawe,"△" He whakamahara taunga,"▲" He whakamahara whakaora anōhanga. | |||||||||
| 2．"★" He tohu āhuatanga matua mo te kai painga me te mahi. | ||||||||||
Ko tātou ngā whakawhitiwhiti pūkaha i ngā POUTOKO RUBBER, me te kiko 15 tau o mahi tonu i roto i ngā rorohiko katoa.
2. Have excellent quality and serving several global top 500 companies.
3. Have a strong technical team can customize rubber raw-material formula according to different needs.
4. Have perfect After-Sales team, once cargo have problem will be 100% recall in the first time.
5. Have own mold department can finished mold process in very fast time and accept any high difficult mold.
Kei te whare mahi IATF 16949:2016 te tūtohu, me ngā mahi: KTW-W270/Watermark/LFGB/RoHs/REACH/FDA tūtohu.
A: Kei te ngāwari tonu te MOQ i waenganui i ngā mahi, ina whai muri i tētahi rahi hanganga e whai ake ana i te 150USD.
A: Āe, kei ahau ngā ratonga OEM/ODM.
A: 30% T/T pūtea tataki i mua, 70% i waho i te tahutahu i muri i te whakaaturanga o ngā taonga. Kaore he mea tataki mō ngā tangata mea nui.
A: Nō te maha, ka mutu i te 15-20 ra i mua o te rīpoata, i te wā o te tūmauru, nā te uruwhenua nui ka hiahiatia te wā kuhu hoki ki te 30 ra.
A: Āe, i muri i te rīpoata e tūpato ana, ka taea e matou te tuku ākina māhea me te utu moe.
EN
